Blood Pressure Monitor (BPM)

FAQs

Blood Pressure Monitor (BPM)

HOW TO USE IT

In just three easy steps, you can able to take reading from BP Machine

1.Connect to Device

Enable bluetooth in your mobile device. – Open callcare24 and go to my health tab. -Click on BP/Pulse tile.

Note: For First time connectivity need to pair the device Turn on the omron device and pair the device by entering the pin which is present on backside of device

2.Measure Vitals

– Take the BP readings.

3.Sync Readings

-Click on save to sync the latest readings into callcare 24 app.
– Click on retake to take a different BP/pulse readings.

FAQ's

What are included in this BPM (Blood pressure monitor)?

a. BPM Machine b. Batteries

Do Smartphone require for this system?

Yes, Smartphone device equipped with Bluetooth is necessary

Is this system compatible with Android and iOS devices?

Yes, This BPM is compatible with both Android and iOS.

Do Tablets are compatible?

Yes, Its compatible

How to Download the APP?

Go to App store or google play store Search for callcare24

Does Wifi or cellular data connection requires all the time for using this APP?

Once the app is downloaded in your smartphone, No need Wi-Fi or cellular data. BPM connects to your mobile device through Bluetooth.

will application maintain day by day readings?

Yes.

Can mobile device sync the data from device at any time?

Yes, but ensure the device is paired with mobile phone.

Troubleshooting

INDICATION: Display or measurement values not working correctly

1. Device battery problem.
2. Internet connectivity.

1. Check the battery status of Vital 360 device.
2. Make sure to charge the device if the battery is low.
3. Switch off the device and Turn it on again.
4. Check the internet is properly connected through Wi-Fi / Cellular network.
5. Change the network mode and try to save the readings.
6. Retake the vitals from device and verify that they are displaying correctly.

INDICATION: Blood Pressure readings are not getting correctly

1. Improper Cuff placement to hand.
2. Improper Selection of positions in vital 360 & not maintaining same positions while measuring BP

1. Check the cuff is placed correctly to selected hand.
2. Keep the cuff properly to hand.
3. Check the device is placed correctly while measuring the BP
4. Verify the vital data after measuring and try to retake the readings if the data is not accurate.

INDICATION: Temperature readings are not getting correctly

1. Improper placement of IR sensor to body
2. Improper accuracy because of dust or dirt in IR sensor

1. Check the device is connected to proper internet
2. Make sure you’re holding the Vital 360 at the correct distance
3. Clean the infrared sensor with a soft cloth, as dust or dirt can impact accuracy.
4. Allow a few seconds between measurements to reset the sensor.
5. Wait or hold the device until the timer completes

Blood Pressure Monitor (BPM)